top of page
VICTRON - BMV-712 Smart, With Bluetooth, 500A Smart Shunt, Battery Monitor 9-90V

VICTRON - BMV-712 Smart, With Bluetooth, 500A Smart Shunt, Battery Monitor 9-90V

"VICTRON - Battery Monitor BMV-712 Smart" lithium version

With its built-in Bluetooth, the BMV Smart is ready for the age of the "Internet of Things" (IoT). Most other Victron Energy products also have Bluetooth. The wireless communication between the products thus simplifies the installation of systems and improves performance.


VICTRON APP
Download the Victron Bluetooth App using a smartphone or other Bluetooth-enabled device. Via the APP you can access your BMV-712 and via the mobile device:
- adjust settings,
- view all important data on one screen,
- view historical data and
- update to the latest software when new features are available.


Easy Installation
All electrical connections are made with the PCB connector on the current shunt.
The shunt is connected to the monitor using a standard RJ12 telephone cable.
Supplied with: RJ 12 cable (10 m) and battery cable with fuse (2 m); No additional components are required.
In addition, a separate front bezel for a square or circular display; includes a security ring for rear mounting and screws for front mounting.


Midpoint Voltage Monitoring
One damaged cell or battery can destroy an entire large, expensive battery bank.
If batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage.
Please also refer to the BMV manual, section 5.2 for more information.
We recommend our Battery Balancer (BMS012201000) to maximize the life of series connected lead-acid batteries.


Very low current draw from the battery
Current consumption: 0.7 Ah per month (1 mA) at 12 V and 0.6 Ah per month (0.8 mA) at 24 V
Lithium-ion batteries in particular have almost no capacity left when they are discharged until they shut off due to low voltage.
After a low voltage shutdown, the capacity reserve of a lithium-ion battery is approximately 1 Ah per 1000 Ah battery capacity.
The battery will be damaged if the remaining reserve capacity is drained from the battery.
For example, a residual current of 10mA can damage a 200Ah battery if the system is left discharged for more than 8 days.


Bistable alarm relay
Prevents increased current drain in the event of an alarm.


Other features
- Battery voltage, current, power, amp-hours consumed and state of charge
- Time remaining at current discharge rate
- Programmable visual and audible alarm
- Programmable relay to switch off non-essential loads or switch on a generator when needed.
- A 500 amp quick connect shunt and connector set.
- Selectable shunt capacity up to 10,000 amps.
- VE.Direct Communications Port
- Stores a wide range of historical data that can be used to assess usage patterns and battery health.
- Wide input voltage range: 6.5 - 70V
- High current measurement resolution 10 mA (0.01 A)
- Additional input for measuring voltage (a second battery), temperature or midpoint voltage and associated alarm and relay settings.


Specifications:
Power supply voltage range 6.5 - 70 VDC Current
draw; Backlight off < 1mA Input voltage
range, auxiliary battery 6.5 - 70 VDC
Battery capacity (Ah) 1 - 9999 Ah
Operating temperature range -40 +50°C (-40 - 120°F )
Measures voltage of a second battery, temperature or midpoint Yes
Temperature measurement range -20 +50°C
VE.Direct communication port Yes
Bistable relay 60 V / 1 A Normally open (function can be reversed)


RESOLUTION & ACCURACY (with a 500 A shunt):
Current ± 0.01A
Voltage ± 0.01 V Amp
hours ± 0.1 Ah State of
charge (0 – 100%) ± 0.1%
Remaining time ± 1 min
Temperature (0 - 50° C or 30 - 120°F) ± 1°C/°F
Current measurement accuracy ± 0.4%
Voltage measurement accuracy ± 0.3%


INSTALLATION & DIMENSIONS:
Installation Flat mount
Front 63mm diameter Front bezel
69 x 69mm (2.7 x 2.7 inch)
Case diameter 52 mm (2.0 inch)
Case depth 31 mm (1.2 inch)
Shunt (included) 500 A / 50mV
cable (included) 10 meter 6 core UTP cable with RJ12 connectors, and cable with fuse for the '+' connection


Package
Contents: 1 x Display Indicator
1 x Display Cover 1
x 500A Measurement Shunt
1 x Connection Cable Display/Measurement Shunt
1 x User Manual

    250,00 €Preis
    inkl. MwSt.
    bottom of page